Caravan Mechanical Repairs Gladstone & Calliope

Total Mobile Mechanical Services provides caravan mechanical repairs across Gladstone, Calliope and surrounding Central Queensland areas.

We diagnose and repair suitable caravan brakes, wheel bearings, hubs, seals, suspension, running gear, couplings, wheels and towing-related mechanical faults. Our workshop capability allows problems to be properly inspected and repaired rather than relying on a quick roadside assessment for work that requires lifting, dismantling or accurate adjustment.

We work on touring caravans, pop-tops, camper trailers, recreational trailers and suitable fifth wheelers, with motorhome base-vehicle support available where the vehicle and repair fit our facilities.

CLICK HERE TO RING US: 0456 765 135

Book caravan brake, bearing, suspension or running-gear repairs.

Complete Caravan Mechanical Repair Services

Caravan mechanical faults can affect braking, towing stability, tyre life and the ability to move the caravan safely.

Our caravan repair work can include:

Wheel-bearing inspection, servicing and replacement
Hub, drum, race and seal inspection
Electric and mechanical brake repairs
Brake magnet, shoe and hardware replacement
Brake adjustment where applicable
Suspension and spring repairs
Bush, shackle, pin and hanger replacement
U-bolt and axle-mounting inspections
Shock absorber inspection and replacement where fitted
Coupling and jockey-wheel repairs
Wheel-stud and visible wheel concerns
Uneven tyre-wear diagnosis
Breakdown-related mechanical assessment

Routine maintenance is covered separately through our CARAVAN & MOTORHOME SERVICING page.

Caravan Wheel-Bearing Repairs

Wheel-bearing failure is a common cause of caravan breakdowns. Bearings may be affected by incorrect adjustment, damaged seals, contaminated grease, corrosion, excessive heat, water entry, overloading or extended towing.

Warning signs can include:

A hub running hotter than the others
Grinding, rumbling or scraping noises
Movement or play at the wheel
Grease leaking from a hub or seal
Uneven braking
Irregular tyre wear
A wheel that does not rotate freely
Unknown bearing-service history

Wheel-bearing work may include hub removal, cleaning and inspection, bearing and race replacement, new seals, lubrication, adjustment and final wheel checks.

If a bearing has overheated or failed, the hub, drum, stub axle, brake components and wheel should also be inspected for related damage. Replacing only the bearing without checking the surrounding components can leave the original cause unresolved.

Caravan Brake Repairs & Electric-Brake Diagnosis

Weak, uneven or dragging caravan brakes can increase stopping distance, cause overheating and place greater load on the tow vehicle.

Caravan brake faults may involve:

Brake shoes and hardware
Electric brake magnets
Brake drums and hubs
Brake adjustment
Damaged or seized components
Wiring and earth connections
The trailer plug
The brake controller
The breakaway battery and switch
The tow vehicle’s electrical supply

We inspect the mechanical and automotive electrical sides of suitable brake faults. Where the problem involves the wiring, brake controller or tow connection, visit our CARAVAN AUTO ELECTRICAL page.

Caravan Suspension & Running-Gear Repairs

Caravan suspension is exposed to vibration, heat, uneven roads, gravel, long-distance travel and variable loading. Worn components can affect towing stability, ride height, tyre life and the position of the caravan on the road.

Suitable suspension and running-gear work may involve:

Leaf springs
Spring eyes and bushes
Shackles and shackle pins
Hangers and mounting components
Equalisers where fitted
U-bolts and axle mounting hardware
Shock absorbers
Visible independent-suspension components
Loose, worn or damaged running gear
Uneven ride height
Suspension noise
Uneven tyre wear

Specialist structural fabrication, chassis straightening or engineering certification may require another appropriately qualified provider. We will identify that boundary rather than claim work outside the repair scope.

Caravan Tyres, Wheels & Uneven Wear

Caravan tyres may become unsafe due to age, cracking, heat exposure, incorrect pressure or internal deterioration before the tread is worn out.

Uneven tyre wear may also indicate:

Loose or worn wheel bearings
Suspension wear
Axle or running-gear concerns
Incorrect tyre pressure
Overloading or poor load distribution
Damaged wheels
Brakes dragging on one side

We can inspect the tyres, wheels, bearings, brakes and suspension together rather than treating every wear pattern as a tyre-only problem.

Related tyre services are available through our TYRES & WHEEL ALIGNMENT page.

Workshop & Mobile Caravan Mechanical Repairs

Wheel-bearing, brake and suspension repairs generally require safe lifting, workshop equipment and adequate room to dismantle components. For that reason, most substantial caravan mechanical repairs should be completed in the workshop.

Suitable mobile assistance may be available for an initial breakdown assessment, basic safety check or accessible problem preventing the caravan from being moved.

Mobile caravan repairs depend on:

The caravan location
Safe working access
The fault and repair scope
Parts requirements
Technician availability
Whether the caravan can be lifted and supported safely

Read more about our MOBILE MECHANIC & BREAKDOWN SUPPORT.

Connected Tow-Vehicle Problems

A caravan that pulls, overheats its brakes or wears tyres unevenly may not have a single isolated fault. The tow vehicle’s brake controller, suspension, tyres, towing setup or electrical connections may also contribute.

Because we service and repair cars, 4WDs and utes, we can assess suitable tow-vehicle concerns through the same business.

For general towing-vehicle repairs, visit CAR & 4WD MECHANICAL SERVICES.

Related Caravan & RV Services

Frequently Asked Questions

Do you provide caravan mechanical repairs in Gladstone?

Yes. We provide suitable caravan brake, bearing, hub, suspension and running-gear repairs for customers across Gladstone, Calliope and surrounding areas.

Do you service caravan wheel bearings?

Yes. We inspect, clean, service and replace suitable caravan wheel bearings, races and seals where required.

Can you repair caravan electric brakes?

Yes. We diagnose suitable mechanical and automotive electrical brake faults involving shoes, magnets, drums, wiring, trailer plugs, controllers and breakaway systems.

Do you repair caravan suspension?

Yes. Suitable work may include springs, bushes, shackles, pins, hangers, U-bolts, shock absorbers and related running-gear components.

Why is one caravan hub hotter than the others?

Possible causes include bearing adjustment, bearing damage, brake drag, seal failure or another hub-related fault. The caravan should be inspected before further long-distance towing.

Can caravan repairs be completed on-site?

Some accessible assessment may be possible, but major brake, bearing and suspension repairs are normally safer and more practical in the workshop.

Do you also repair camper trailers?

Yes. We work on suitable camper-trailer brakes, bearings, suspension, running gear and automotive electrical systems.