Menu
My Bag

Your bag is currently empty.

Authorised KickAss Products Installer Gladstone

Authorised KickAss Products installer · Supply and installation

Power your setup for the way you travel.

Keep your fridge, lights and accessories running on the road. Total Mobile Mechanical Services supplies and fits suitable KickAss Products. We work on 4WDs, canopies, caravans, campers, motorhomes and work vehicles. We plan the batteries, charging, solar and wiring together.

Call 0456 765 135 to discuss the equipment you want to run and what is already fitted. Planned installations are arranged through our workshop at 6 Wright Road, Calliope QLD 4680.

KickAss wireless canopy power system installed in a 4WD touring setup
KickAss canopy power system.
Authorised KickAss Products supply and installation
Qualified auto-electrical capability
A complete system matched to your loads

The products and the installation, organised together

Tell us how you use the vehicle and what is already fitted. We check the space, parts and power needs before planning the setup. We confirm product choice and stock before ordering or starting work.

Lithium and dual-battery systems

We fit suitable lithium, deep-cycle and extra 12V batteries. We also install dual-battery systems and kits. Battery size depends on what you want to run and how often it can recharge.

DC-DC and solar charging

We fit DC-DC chargers and suitable fixed or portable solar panels. We check the battery type and charging sources. Tell us how much time you spend driving and parked.

Canopy power systems

We fit suitable PowerBoss and canopy power systems for 4WDs, utes and work vehicles. We plan the battery, controls and accessory circuits together. The layout must allow safe mounting, cable runs and later service access.

Inverters and power management

We fit suitable inverters, chargers, battery boxes and power controls. Tell us which appliances you want to run. We check the loads, charging time and space before choosing the setup.

Wiring, protection and accessories

We plan cables, fuses, plugs, switches, lights and fridge circuits. Cable size and length affect voltage loss. We also check circuit protection and mounting so the parts work together.

Monitoring and existing-system testing

We fit power controls and monitors and test existing systems. If a fridge cuts out or a battery will not charge, we check the cause. The fault may be in the battery, wiring, charger or appliance.

A useful power system starts with how you use it

Balance the loads and the charging

First, tell us what needs power and how long you use it. We check how the battery will recharge from the vehicle, solar or other sources. Cable runs, fuses, airflow and mounting also matter. Inverter loads and charge time guide the battery choice.

A 4WD with a fridge and lights has different needs from a caravan on a long stay. A work canopy may also need to protect the starting battery. We plan around your use, budget and any future additions.

Find the weak point in an existing setup

A bigger battery will not fix every charging fault. Poor connections or voltage loss may be the cause. Our qualified auto electrician tests the setup and explains which parts need attention.

The power setup must work with the vehicle charging system. Our mechanics and auto electrician can check the alternator, engine controls and any changes already made. Tests help separate a failed part from a setup fault.

4WD, ute and canopy installations

Plan for the gear you use on trips or at work. The setup can include extra batteries, DC-DC charging, solar, an inverter, lights and fridge circuits. We also allow for fuses, monitoring and access for later service work.

Planning a larger touring build? We can discuss the power system alongside 4WD upgrades, tyres, wheel alignment and cooling work. The setup needs to suit the whole vehicle.

Caravan, camper and motorhome power

We check your current batteries and chargers before planning an upgrade. The choice depends on your travel, loads, space, charge time and budget. The largest battery or inverter is not always the best fit.

Caravan installations are booked at our Calliope workshop and dedicated yard. We also repair wiring and charging faults. Bring details of the current system so the upgrade works with the gear already fitted.

Tell us what you want the system to run

Tell us the vehicle and what you want to power. How long will you stay away from mains power? List your batteries, chargers, solar panels and any inverter. Mention extra gear you may add later.

These details help us plan the parts and workshop booking. Longer installations and testing suit the workshop. Some vehicle faults may suit a mobile visit. Call with the location and problem to discuss what is practical.

Turn the power plan into a working installation

  1. Discuss the setup

    Call 0456 765 135 with the vehicle, current equipment and the accessories you want to power.

  2. Confirm the package

    We assess compatibility, suitable products, availability and installation requirements before the work proceeds.

  3. Book the installation

    Arrange the agreed supply, fitting and system testing through our Calliope workshop.

Gladstone, Calliope and surrounds.

We serve Gladstone, Calliope and nearby towns. These include Boyne Island, Tannum Sands, Mount Larcom, Benaraby and Miriam Vale. Our main workshop is in Calliope. Call to plan power for your touring or work vehicle.

KickAss Products installation questions

Can you supply the products as well as install them?

Yes. Total Mobile Mechanical Services is an authorised KickAss Products installer. We can supply suitable products and confirm the parts, stock and fitting needs before work starts.

Can you install dual batteries, solar and an inverter together?

Yes, where the setup suits the vehicle. We plan batteries, DC-DC charging, solar and accessory circuits together. We also check inverter loads and monitoring needs.

Can you test my existing system before replacing it?

Yes. We test the batteries, charging, wiring and voltage loss. We check fuses and connected loads too. The fault may be in a part or in how the system is set up.

Do you fit these systems in caravans and motorhomes?

Yes. We work on suitable caravans, campers and motorhomes as well as 4WDs, utes and work vehicles. Caravan fitting is booked at our Calliope workshop.

Can I browse the range before calling?

Yes. The official KickAss Products website is a useful starting point. Call with the products you are considering so we can discuss suitability and confirm current availability before ordering.

Get the right power behind your next trip.

Call Total Mobile Mechanical Services on 0456 765 135 to discuss KickAss Products. Tell us how you travel or work and which gear needs power. We will help plan a suitable system.

Please contact us and our friendly team will get back to you.